Solid Timber Installation

The flooring boards should keep in their original packaging until ready to be laid. This will prevent the product from humidity and damage before installation. Each board should be carefully examined before installation in order to make sure that it is in acceptable condition as no claims relating to surface defects can be accepted after installation.

Before commencing work, ensure that the floor will fit under doors, as well as the skirting board.

Remember, it is the most important steps for the successful installation and performance of solid wood floor to modify and maintain the site conditions. Check if the heating or cooling is set within the usual temperature range. Material should be on the job site for more than 48 hours before being installed. The flooring is acclimatized and ready for installation when it has reached a moisture level consistent with the job site and normal living conditions. Open the cartons, but do not take the product out of the cartons. The installation of solid wood flooring should be postponed until all moisture producing trades such as pouring basement concrete floors, drywall and plaster work, plumbing, etc. are complete and their work is thoroughly dry.

Two kinds of sub-floor are recommended; Plywood or concrete.